Urschel Translicer 2000 SLICER Y4344
Urschel Translicer model TRS-2000 CUTTER, strip cutter, julienne cutter, flat and crinkle slicer, Y4344
URSCHEL TRANSLICER, Model TRS-2000...
The Urschel Translicer 2000 CUTTER is manufacturer recommended for flat slices, wavy / crinkle slices, oval shreds and julienne cuts of firm vegetables, fruits and meats up to 4 inches in diameter, and leafy (compressible) vegetables up to 6 inches in diameter; especially recommended for elongated products such as pickles, peppers, celery,carrots, leeks, green onions, asparagus, zucchini, pepperoni, wieners, plantains, bread sticks, cassava, chicken tenders, and many other products.
~ V-shaped feed belt, helps orient products for clean, straight cuts.
~ Manufacturer offers parts for...
+ Flat Slices: 1/32 to 2" (.8 to 50.8 mm) Crinkle Slices: 1/32 to 2" (.8 to 50.8 mm) in thickness with 4-2/3 waves per inch and with a crinkle depth of 1/16" (1.6 mm).
+ Microslice wheels for Microslice wheels for .030 to .240" (.8 to 6 mm) Crinkle Slices: .069" (1.8 mm) thickness with 3-1/3 waves per inch and with a crinkle depth of .080" (2.0 mm) Oval Shred: This shred has an oval-shaped cross section measuring approximately .125" (3.2 mm) thick by .250" (6.4 mm) wide. Julienne Strips: A wide range of julienne strips can be made from firm products.
+ Julienne Wheels: Julienne cuts ranging from 1/2 x 1/2" (12.7 x 12.7 mm) to 2 x 2" (50.8 x 50.8 mm) are produced by using julienne knives on the slicing wheel.
+ Note: Some special cutting setups may cost more.
+ CALL 315-589-4511 to discuss your particular food process cutting specification.
~ 29 inch infeed height to the base of the "V". 35 inch infeed height to feed from the side; 8 inch discharge height; --leg extensions available to buyer specification. CALL 315-589-4511 to discuss your particular food process cutting machine specifications.
~ Standard spring-loaded hold-down assembly.
~ Complete with stainless steel (factory) operator control panel with Urschel interlock safety system, controlling the two drives (3HP cutting head drive, with 1.5HP feed belt drive), each with variable speed controls.
As of this writing, this Translicer 2000 Urschel slicer has just arrived into stock at Alard, and is available for timely service and shipment.
CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process cutting equipment needs.
Alard item reference: #:Y4344